Second hand machines

  • Pre-shredder - TYRON 2500 2.0Shredder
  • Pre-shredder - TYRON 2000 XL 2.0Shredder
  • Pre-shredder - TYRON 2000 XL 2.0Shredder
  • Air Blower - AIRWOLF WS 1500Separation
  • Hammermill - ARTHOS 1600Shredder
  • Pre-shredder - TYRON 2000Shredder
  • Pre-shredder - TYRON 2000Shredder
  • Hammermill - ARTHOS 1600 Shredder
  • Pre-shredder - TYRON 2000 XL 2.0 Shredder
  • Pre-shredder - TYRON 2000 XL 2.0 Shredder
  • Pre-shredder - TYRON 2500-EShredder
  • Pre-shredder - TYRON 2500-EShredder
  • Ferrous- and non-ferrous separator - GLADIATORSeparation
Alle Maschinen anzeigen
Übersicht Gebrauchtmaschinen
  • Pre-shredder - TYRON 2500 2.0Shredder
  • Pre-shredder - TYRON 2000 XL 2.0Shredder
  • Pre-shredder - TYRON 2000 XL 2.0Shredder
  • Air Blower - AIRWOLF WS 1500Separation
  • Hammermill - ARTHOS 1600Shredder
  • Pre-shredder - TYRON 2000Shredder
  • Pre-shredder - TYRON 2000Shredder
  • Hammermill - ARTHOS 1600 Shredder
  • Pre-shredder - TYRON 2000 XL 2.0 Shredder
  • Pre-shredder - TYRON 2000 XL 2.0 Shredder
  • Pre-shredder - TYRON 2500-EShredder
  • Pre-shredder - TYRON 2500-EShredder
  • Ferrous- and non-ferrous separator - GLADIATORSeparation

TYRON 2500 2.0

  • Year of manufacture:2019
  • Operating hours:3 h
  • Installed on tracks
  •  
  • Grinding chamber configuration

  • Incl. Special hard welded reinforced tools, 5-elements with 8/8 discs
  • Shaft speed individually and infinitely variable from 0 to max 24 rpm
  • Incl. breaker bar
  • Incl. tipping trough
  •  
  • Drive unit

  • Drive unit with 566 kW - with SCR
  • Inkl. Scania Diesel
  • Incl. sound insulation set (standard)
  • Incl. Power Ram pre filter before air filter unit
  • Incl. central lubrication system for main bearings of shafts
  •  
  • Electrical-/ Control system

  • Incl. IFM Display
  • Incl. remote control
  • Incl. 4 shredding programs (wood, waste, green waste and special)
  •  
  • Outfeed belt

  • Incl. outfeed belt conveyor
  •  
  • Included Options

  • Incl. pre-welded tools, 5-elements with 8/8 discs
  • Incl. overband magnet, hydr. height adjustable (Neodym)
  • Incl. electrical service pump for hydraulic oil
  • Incl. pressure sensors
  • Incl. additional noise protection kit (-10 dB (A))
  • Incl. hopper extension, 3 sides each ca. 800 mm
  • Incl. Rubber shoes for tracks
  • Incl. belt with steel inlay
  • Incl. GPS-module incl. 24 months portal access (data SIM card by customer)
  • Incl. additional cable remote control for tracks
  • Incl. Scania warranty Extension to 36 months, max. 9.000 h

TYRON 2000 XL 2.0

  • Year of manufacture:2019
  • Operating hours:approx. 60 h
  • Installed on tracks
  •  
  • Grinding chamber configuration

  • Incl. Special hard welded reinforced tools, 4-elements with 7/7 discs
  • Shaft speed individually and infinitely variable from 0 to max 41 rpm
  • Incl. breaker bar
  • Incl. tipping trough
  •  
  • Drive unit

  • Drive unit with 294 kW
  • Inkl. Scania Diesel DC09 Stage V / Euromot V final
  • Incl. sound insulation set (standard)
  • Incl. Power Ram pre filter before air filter unit
  • Incl. central lubrication system for main bearings of shafts
  •  
  • Electrical-/ Control system

  • Incl. IFM Display
  • Incl. remote control
  • Incl. 4 shredding programs (wood, waste, green waste and special)
  • Incl. Cleanfix (reversible fan)
  • Incl. pivoting cooler
  •  
  • Outfeed belt

  • Incl. outfeed belt conveyor
  •  
  • Included Options

  • Incl. pre-welded tools, 4-elements with 7/7 discs
  • Incl. overband magnet, hydr. height adjustable (Neodym)
  • Incl. electrical service pump for hydraulic oil
  • Incl. pressure sensors
  • Incl. GPS-module incl. 24 months portal access (data SIM card by customer)
  • Incl. additional noise protection kit (-10 dB (A))
  • Incl. hopper extension, 3 sides each ca. 800 mm

HAAS TYRON 2000 XL - 2.0

  • Year of manufacture:2019
  • Installed on tracks
  •  
  • Grinding chamber configuration

  • Incl. Special hard welded reinforced tools, 4-elements with 7/7 discs
  • Shaft speed individually and infinitely variable from 0 to max 41 rpm
  • Incl. breaker bar
  • Incl. tipping trough
  •  
  • Drive unit

  • Drive unit with 294 kW/400 hp
  • Scania Diesel DC09 Stage IV / EPA 4final
  • Incl. sound insulation set (standard)
  • Incl. Power Ram pre filter before air filter unit
  • Incl. central lubrication system for main bearings of shafts
  •  
  • Electrical-/ Control system

  • Incl. IFM Display
  • Incl. remote control
  • Incl. 4 shredding programs (wood, waste, green waste and special)
  • Incl. Cleanfix (reversible fan)
  • Incl. pivoting cooler
  •  
  • Outfeed belt

  • Incl. outfeed belt conveyor
  •  
  • Included Options

  • Incl. overband magnet, hydr. height adjustable (Neodym)
  • Incl. pre-welded tools; 4-elements with 7/7 discs
  • Incl. hopper extension, 3 sides each ca. 800 mm
  • Incl. additional noise protection kit
  • Incl. electrical service pump for hydraulic oil
  • Incl. belt with steel inlay
  • Incl. GPS-modul incl. 24 monts portal access (data SIM card to be provided by customer)
  • Incl. anti-corrosive protection for sea freight
  • Incl. pressure sensors

Mobile Air Blower Separator

  • Installed on tracks
  •  
  • Horizontal Vibrating Feeder

  • 2460 mm long x 1400 mm wide tray
  • Variable speed control
  •  
  • Feeder Conveyor

  • 1500 mm wide plain belt
  • Variable speed control on belt
  • 3 kW WEG electric motor
  •  
  • Drum / Blower fan

  • 1480 mm wide and 362 mm diameter drum
  • 2x 5.5kW (=11kW in total) adjustable air control
  •  
  • Drive unit

  • 65 kVA Perkins Diesel generator
  • 22 kW electric/hydraulic power pack for tracking and folding/unfolding conveyors
  •  
  • Included Options

  • Incl. recirculating dust control system
  • Incl. 2 integrated discharge conveyors with hydraulic folding
  • Incl. removable dust covers over vibratory feeder and lights conveyor
  • Incl. on board hydraulic power pack for crawler tracks control and hydraulic folding
  • Incl. on board air compressor to allow cleaning of the machine
  • Incl. on board working lights
  • Incl. interlock switch to operate the machine by on board 65kVA
  • Incl. rubber shoes for tracks
  • Generator or via main electricity (customer supplied)

HAAS ARTHOS 1600 - Demo unit

  • Year of manufacture:2019
  • Operating hours:approx. 216 h
  • Installed on tracks
  •  
  • Incl. Scania DC16 566 kW diesel drive
  • Incl. Scania DC16 566 kW diesel drive
  • Incl. central lubrication system for main bearings
  • Incl. Power Ram pre-cleaner
  • Incl. easy screen exchange system
  • Incl. double screw conveyor ø 400 x 5.100 mm
  • Incl. standard hammers 50 mm
  • Incl. standard screen basket 80 mm
  •  
  • Incl. following options:

  • Incl. ballistic chute
  • Incl. radial discharge conveyor

HAAS TYRON 2000 (700 x 2000)

  • Year of manufacture:2013
  • Operating hours:approx. 8.900 h
  • Installed on tracks
  •  
  • Grinding chamber configuration

  • Incl. special hard welded reinforced tools, 4-elements with 7/7 discs
  • Incl. sound insulation set (standard)
  • Incl. Cleanfix-radiator
  • Incl. hopper extension 3 sides each ca. 800 mm
  • Incl. overband magnet, height adjustable

HAAS TYRON 2000 (HDWV 700x2000)

  • Year of manufacture:2004
  • Operating hours:approx. 6.000 h
  • Installed on tracks
  •  
  • Grinding chamber configuration

  • Incl. Special hard welded reinforced tools, 5-elements with 9/9 discs
  • Shaft speed individually and infinitely variable from 0 to max 32 rpm
  • Incl. breaker bar
  • Incl. tipping trough
  •  
  • Drive unit

  • Drive unit with 250 kW
  • Inkl. Cummins Diesel QSM 11-C335
  • Incl. Power Ram pre filter before air filter
  • Incl. central lubrication system for main bearings of shafts
  •  
  • Electrical-/ Control system

  • Incl. Klöckner / Möller-Display
  • Incl. remote control
  • Incl. 2 shredding programs (wood, waste
  •  
  • Outfeed belt

  • Incl. outfeed belt conveyor
  •  
  • Included Options

  • Incl. pre-welded tools, 5-elements with 9/9 discs
  • Incl. overband magnet, hydr. height adjustable (standard) – optional available
  • Incl. hopper extension (3 sides, each 800 mm) – optional available
  •  
  • Refurbishment / Service

  • The machine has a completely new set of shredding shafts including counter combs and breaker bar (approx. 50 hours). The hydraulic components, pumps and motors have also been refurbished and all fluids and lubricantions have been renewed, including Cummins engine service.

ARTHOS 1600

  • Year of manufacture:2019
  • Operating hours:approx. 1.000 h
  • Installed on tracks
  •  
  • Incl. Scania DC16 566 kW diesel drive
  • Incl. central lubrication system for main bearings
  • Incl. Power Ram pre-cleaner
  • Incl. easy screen exchange system
  • Incl. double screw conveyor ø 400 x 5.100 mm
  • Incl. standard hammers 50 mm
  • Incl. standard Screen 120 mm
  • Incl. balistic chute
  • Incl. overband magnet Neodym

TYRON 2000 XL 2.0

  • Year of manufacture:2018
  • Operating hours:approx 650 hours
  • Installed on tracks
  •  
  • Grinding chamber configuration

  • Incl. special hard welded reinforced tools, 4-elements with 7/7 discs
  • Rpm of shafts individually and infinitely variable from 0 to max 41 rpm
  • Incl. breaker bar
  • Incl. tilting hopper
  •  
  • Drive unit

  • Drive unit with 294 kW/400 hp
  • Incl. Scania Diesel, stage 4final/ Euromot IVl
  • Incl. sound insulation set (standard)
  • Incl. Power Ram pre filter before air filter unit
  • Incl. central lubrication system for main bearings of shafts
  • Incl. Cleanfix (reversible fan)
  • Incl. pivoting cooler
  •  
  • Electrical-/ Control system

  • Incl. IFM Display
  • Incl. remote control
  • Incl. 4 shredding programs (wood, waste, green waste and special)
  •  
  • Outfeed belt

  • Incl. outfeed belt conveyor
  •  
  • Included Options

  • Pivoting cooler
  • Incl. pre-welded tools, 4-elements with 7/7 discs
  • Incl. overband magnet, hydr. heigth adjustable (Neodym)
  • Inc. hopper extension (3 sides, each 800 mm)
  • Incl. pressure sensors
  • Incl. Scania warranty Extension to 36 months, max. 9.000 h
  • Incl. additional cable remote control for tracks
  • Incl. additional noise protection kit (-10 db (A))

TYRON 2000 XL 2.0

  • Year of manufacture:2019
  • Operating hours:approx. 15 hours
  • Installed on tracks
  •  
  • Grinding chamber configuration

  • Incl. special hard welded reinforced tools, 4-elements with 7/7 discs
  • Rpm of shafts individually and infinitely variable from 0 to max 41 rpm
  • Incl. coarse breaker bar
  • Incl. tilting hopper
  •  
  • Drive unit

  • Drive unit with 294 kW/400 hp
  • Scania Diesel DC09 Stage IV / EPA 4final
  • Incl. sound insulation set (standard)
  • Incl. Power Ram pre filter before air filter unit
  • Incl. central lubrication system for main bearings of shafts
  •  
  • Electrical-/ Control system

  • Incl. IFM Display
  • Incl. remote control
  • Incl. 4 shredding programs (wood, waste, green waste and special)
  •  
  • Outfeed belt

  • Standard outfeed belt conveyor
  •  
  • Included Options

  • Cleanfix (reversible fan)
  • Pivoting cooler
  • Scania warranty extension, 36 months, max. 9.000 operating hours
  • Cable remote control for tracks
  • Rubber shoes for tracks
  • Overband magnet, hydr. height adjustable (neodym-version)
  • Electric pump for refill / exchange of hydraulic oil
  • Belt conveyor with steel inlay
  • GPS-Modul, incl. 24 months portal access (data SIM card by customer)
  • CAN-wireless & operation data display via Android-App
  • Additional noise protection kit (-10 dB (A))
  • Hopper extension 3 sides each approx. 800 mm
  • Fire extinguish system
  • Engine heater

TYRON 2500-E

  • Year of manufacture:2010
  • Operating hours:13.500 h
  • Availablefrom February 2020
  • Machine on a sturdy basic frame
  •  
  • Grinding chamber configuration

  • Incl. special hard welded reinforced tools, 4-elements with 7/7 discs
  • Shaft speed individually and infinitely variable from 0 to max 32 rpm
  • Incl. breaker bar
  • Incl. tipping trough
  •  
  • Drive Unit

  • Electrical drive 2x 132 kW
  • with star-delta start up)
  • Incl. central lubrication system for main bearings of shafts
  •  
  • Electrical-/Control system

  • Incl. IFM Display
  • Incl. Remote Control
  • Incl. 4 shredding programs (wood, waste, green waste and special)
  •  
  • Outfeed belt

  • Incl. outfeed belt conveyor
  •  
  • Included Options

  • Incl. prewelded tools, 4-elements with 7/7 discs
  • Incl. support structure, ca. 500 mm
  • Incl. hopper extension, 3 sides, each ca. 800 mm
  • Incl. drive drum stainless steel

TYRON 2500-E

  • Year of manufacture:2013
  • Operating hours:7.250 h
  • Machine on a sturdy basic frame
  •  
  • Grinding chamber configuration

  • Incl. special hard welded reinforced tools, 5-elements with 8/8 discs
  • Shaft speed individually and infinitely variable from 0 to max 23 rpm
  • Incl. breaker bar
  •  
  • Drive Unit

  • Electrical drive 2 x 160 kW
  • Incl. central lubrication system for main bearings of shafts
  •  
  • Electrical-/Control system

  • Incl. IFM Display
  • Incl. Remote Control
  • Incl. 4 shredding programs (wood, waste, green waste and special)
  •  
  • Outfeed belt

  • Incl. outfeed belt conveyor, horizontal (1.400 x 1.600 mm)
  •  
  • Included Options

  • Incl. pre-welded tools, 5 elements with 8/8 discs
  • Incl. belt with steel inlay
  • Incl. separate drive unit "Power Pack", max. 5 m distance
  • Incl. hopper extension with chute, 3 sides, each ca. 800 mm, special execution
  • Incl. support structure (ca. 1.200 mm)
  • Incl. pressure sensors
  • Without: tipping hopper

HAAS GLADIATOR Mobile ferrous- and non-ferrous separator 1500

  • Year of manufacture: 2018
  •  
  • Horizontal Vibrating Feeder: 2.46 m Long x 1.4 wide tray
  • Magnetic drum: Width 1.550 mm (Wagner Drum)
  • Eddy Current Separator: Working width 1.500 mm (Wagner Drum)
  • Drive unit: 65 kVA Perkins diesel generator
  • Transport Dimensions:8.100 mm x 2.850 mm x 3.200 mm 3 integrated inclined discharge conveyors with hydraulic foldinginstalled on tracks

Price on Request

Offer request
Second hand mashine
Contact information
Attachment
Note on the processing of your data
In the course of processing your request, the entered data are electronically processed and saved. More general information about the processing of personalized data in the course of our internet offer, please refer to our data protection declaration. For more information on your personal data, please refer to the information regarding article 13 DS-GVO. By mailing this form you confirm to have taken note of this information.