Let it crack – with our mobile omnivore!
The hammermill will be mobile for the first time, on tracks and will effortlessly perform, even in the most difficult environments.
In the stationary sector, the HAAS ARTHOS hammermill has so far been known as the “HSZ” and has been a popular secondary shredder among connoisseurs for years. The developers at HAAS have now succeeded in ideally adapting the technology of the stationary version to mobile technology.
In the mobile version, impurities in the input material are also automatically separated thanks to the ballistic chute specially developed by HAAS. The system has been in stationary use for several thousand operating hours at many well-known power stations and in the chipboard industry worldwide and has proven itself. The machine does not have to be stopped to remove the impurities, thus downtimes are significantly minimized and costs thereby reduced!
Another highlight of the HAAS hammermill is the very simple screen exchange as the machine can be opened hydraulically. The operator has the possibility to change the screen basket within a very short time and thus to vary the size of the output material.
In combination with the TYRON primary shredder, the new innovation from HAAS thoroughly and quickly shreds wood waste, green waste, RDF and PVC waste to < 30-150 mm at any location.
Range of application
- Waste Wood
- Green Waste
- Biomass
- PVC-Profiles / plastic window frame
- Bulky Waste
- Industrial Waste
Product advantages
- Resistant against impurities due to flexible swinging hammers.
- Ballistic chute – Impurities will be ejected automatically with the ballistic chute developed by HAAS!
- Easy screen change system – Screen exchange in shortest time due to hydr. openable screen basket.
- Effortless exchange of hammers and hammer shafts
- Special HAAS hammer and counter-knife combinations minimize the fine fraction.
- Sturdy construction - Downtimes will be minimized and costs reduced.
- Homogeneous end product and exposure of ferrous and non-ferrous parts like nails and staples
- Very quiet, even with high performance
- Low fuel consumption
Range of application
Only in combination with a primary shredder
Capacity up to 55 t/h!
End product from “fine” ca. < 30 mm to “coarse” ca. < 150 mm, depending on hammer configuration and screen basket-system (individual solutions on demand)
Waste Wood
Green Waste
Biomass
PVC-Profiles / plastic window frame
Bulky Waste
Industrial Waste
Model overview
- ARTHOS 1600566 kW
Options
Technical Data ARTHOS 1600
- Infeed width 1.600 mm
- Rotor ø 1.200 mm
- Drive566 kW
- Capacity up to55 t/h
- Weight approx. 40 t
* Throughput based on an average grain size of 60 – 80 mm with a normal and continously feeding and average degree of impurities.
Downloads
- FLYER (EN)
ca. 5.2 MB