TYRON-E QC stationary – mounted on a steel frame
For continuous shredding in stationary processing lines
The stationary TYRON is the ideal solution for applications where mobility is not required. The motor unit (power pack) can be installed outside the plant area exposed to dust and dirt. This protects the technology and supports reliable long-term plant operation. The stationary design also provides additional opportunities for customization: The feed area can be specifically tailored and engineered to match the material type, throughput requirements, and feeding technology used.
In processing lines, the TYRON typically performs the primary shredding stage and therefore represents the first step in the process.
- Designed for continuous operation
- Protected motor unit through separate installation
- Designed for continuous operation with high throughput
- Customized adaptation to material, throughput, and feeding system
- Easy integration into new and existing plants
Why Was QC Quick-Change Developed?
Machine downtime costs money.
That is why HAAS engineers developed the QC Quick-Change System. With QC, the complete TYRON shredding unit can be replaced in approximately 45 minutes, and the rotor shafts can be changed in less than 90 minutes.
Benefits:
- Complete shredding unit replacement in approximately 45 minutes
- Rotor shaft replacement in less than 90 minutes
- Increased machine availability
- Maintenance can be performed outside the machine
The complete shredding unit can be removed from the machine with only a few fastening and lifting operations.
✔ Shredding unit replacement in approximately 45 minutes
The shredding unit consists of an upper and lower housing section. After removing the upper housing, counter combs, and hopper, the rotor shafts are fully accessible within the lower housing.
✔ Rotor shaft replacement in less than 90 minutes
Asynchronous planetary gearboxes, generously dimensioned bearings, and a maintenance-friendly jaw coupling ensure reliable performance, even during continuous operation.
The HAAS shredding unit stands out through its modular design and customizable configuration.
This results in not a standard shredding unit, but a configuration specifically tailored to the material feed, process requirements, and desired output particle size.
- Compact solution for smaller volumes -
Shredding Unit
- Wellenlänge 1,500 mm
- Wellendurchmesser 700 mm
- Gewicht Brecherwerk (QC) ca. 5,900 kg
- Wellendrehzahl 0-33 U/min
Machine specifications individually engineered
Drive shredding
- Elektromotor WEG
- Leistung 2x 90 kW
- Compact solution for smaller volumes -
Shredding Unit
- Wellenlänge 1,500 mm
- Wellendurchmesser 700 mm
- Gewicht Brecherwerk (QC) approx. 5,900 kg
- Wellendrehzahl 0-33 rpm
Machine specifications individually engineered
Drive shredding
- Elektromotor WEG
- Leistung 2× 110 kW
- Powerful all-rounder -
Shredding Unit
- Wellenlänge 2,000 mm
- Wellendurchmesser 700 mm
- Gewicht Brecherwerk (QC) approx. 8,000 kg
- Wellendrehzahl 0-43 rpm
Machine specifications individually engineered
Drive shredding
- Elektromotor WEG
- Leistung 2× 110 kW
- Powerful all-rounder -
Shredding Unit
- Wellenlänge 2,000 mm
- Wellendurchmesser 700 mm
- Gewicht Brecherwerk (QC) approx. 8,000 kg
- Wellendrehzahl 0-43 rpm
Machine specifications individually engineered
Drive shredding
- Elektromotor WEG
- Leistung 2× 132 kW
- High throughput volumes -
Shredding Unit
- Wellenlänge 2,500 mm
- Wellendurchmesser 900 mm
- Gewicht Brecherwerk (QC) approx. 15,500 kg
- Wellendrehzahl 0-31 rpm
Machine specifications individually engineered
Drive shredding
- Elektromotor WEG
- Leistung 2× 160 kW
The brochure provides a concise overview of the design, operating principle, and performance specifications of the TYRON twin-shaft shredder. It is suitable for internal coordination and project planning.
Contents at a glance:
- Technical data
- Equipment options
- Application areas
- Reference examples
Not sure which machine is the best fit for your material? Our experts will be happy to assist you in selecting the right machine. Upon request, we can evaluate your material or demonstrate live which solution is best suited to your application.
📞 +49 2661 9865-0
✉ sales@haas-recycling.de
See the stationary HAAS TYRON operating as part of complete processing plants. The videos show different materials and provide practical insights into throughput, material flow and operation.
STATIONARY TYRON: WASTE WOOD PROCESSING
The stationary TYRON pre-shreds waste wood as the first processing stage. The enclosed processing plant with dust extraction is installed entirely outdoors.
STATIONARY TYRON: COMMERCIAL MIXED WASTE AT 15–20 T/H
Operating as part of a complete processing plant, this stationary TYRON shreds commercial mixed waste at a throughput of 15 to 20 tonnes per hour.