Partial Disassembly of the Shredding Unit
Only a few bolting and lifting operations are required to replace the TYRON shredding unit.
The modular shredding unit system
Find out how the modular Quick-Change system enables the entire shredding unit to be replaced quickly directly on the machine, thereby facilitating the efficient carrying out of maintenance and servicing work. This helps to reduce downtime and increase the productive operating time of the HAAS TYRON.
Because every minute of downtime costs money.
The modular system enables fast replacement of the shredding unit directly on the machine and supports rapid recommissioning of the TYRON.
Downtime can result in significant costs in industrial shredding operations. Maintenance work, tool changes, or the replacement of worn components can put machines out of service for many hours or even days.
That is why HAAS developed the modular Quick-Change System.
The complete shredding unit can be replaced directly on the machine. Maintenance work can be prepared in advance, carried out in parallel, or performed outside the machine. This can help reduce downtime and increase machine availability.
Benefits:
Quick-Change was developed to minimize the impact of maintenance work on machine availability. The faster a machine is ready for operation again, the more efficiently the entire processing line can be run.
in approximately 45 minutes
The complete shredding unit can be removed from the machine with only a few mounting and lifting operations. After releasing the fastening points, the entire shredding unit can be lifted out as a module and replaced with a prepared unit.
Your advantage:
The actual maintenance work can be carried out independently of the machine. While one shredding unit is being serviced, another unit can already be installed.
Minimum downtime. Maximum availability.
✔ Shredding unit replacement in approximately 45 minutes
Only a few bolting and lifting operations are required to replace the TYRON shredding unit.
The shredding unit, including the hopper and hopper extension, is moved forward.
The complete shredding unit can now be lifted from the machine.
Watch the video to see how the entire TYRON shredding unit, fitted with the QC Quick-Change system, can be dismantled and replaced in just a few steps.
In less than 90 minutes
The replacement of the rotor shafts has also been specifically designed to minimize downtime.
The shredding unit consists of an upper and a lower shell. Once the upper shell, including the counter combs and hopper, has been removed, the rotor shafts are fully accessible in the lower shell.
This allows the shafts to be removed quickly and refurbished cost-effectively either directly in the machine or on a dedicated welding fixture
Your benefit:
Fast access to all wear-related components supports efficient maintenance work and helps reduce downtime.
✔ Rotor shaft replacement in less than 90 minutes
The shredding unit consists of an upper and a lower shell. After removing the upper shell together with the combs and hopper, the rotor shafts are freely accessible in the lower shell.
The shafts can be removed quickly.
The shafts can be removed quickly and refurbished cost-effectively either directly in the machine or on a dedicated welding fixture.
To simplify maintenance and help reduce downtime
The complete drive unit is designed as a self-contained module and remains permanently connected to the machine frame.
Large drive shaft bearings, asynchronous planetary gearboxes, and a maintenance-friendly cloverleaf coupling ensure reliable operation, even under continuous heavy-duty conditions.
For maintenance work, the shredding unit can be moved forward together with the hopper and hopper extension, providing convenient access to the drive components.
Detailed view of the shredding unit in the extended maintenance position.
Because every material application has different requirements.
Each application places specific demands on shredding performance, throughput, and target particle size.
For this reason, every HAAS shredding unit is individually configured.
The following parameters are individually matched:
Example: TYRON 2000 XL QC
Questions from Practical Operation
No. Since 2025, all new TYRON shredders have been equipped with the Quick-Change System as standard. Upon request, new machines are still available with the proven 2.0 shredding unit.
Many older TYRON shredders can also be retrofitted with Quick-Change technology. We would be happy to check, without obligation, which solution is suitable for your machine.
With the HAAS QC Quick-Change System, individual shafts can be replaced in less than 90 minutes, and complete shredding units can be exchanged in less than 45 minutes. This reduces setup and maintenance times while increasing machine availability.
Yes. The QC Quick-Change System was developed for easy handling. Once your staff is familiar with the process, they can independently replace shafts and shredding units and return the machine to operation within a short time.