Contact & Service
ARTHOS - Stationary Hammermill
Uniform Secondary Shredding in Industrial Processing Lines
The stationary HAAS ARTHOS is designed for the secondary shredding of pre-shredded materials, producing uniform particle sizes for downstream processing steps or defined end products.

Uniform Fractions for Defined End Products

High Throughput Performance and Reliable Process Line Integration

The ARTHOS performs the secondary shredding of previously processed materials and ensures consistent material preparation. Combined with the TYRON, it forms a powerful processing chain, from primary shredding to uniform fractions for further processing or direct energy recovery. Depending on the input material and the desired particle size, specially configured HAAS hammers, counter knives, and grinding zones are used. These combinations are based on many years of practical experience and the continuous development of shredding technology. Special hammer and counter-knife configurations reduce the fine fraction and enable material-specific processing.

A key advantage is the machine's high resistance to impurities. Foreign objects such as embedded ferrous (Fe) and non-ferrous (NE) metals (e.g. nails, screws, fittings, and hardware) are exposed as far as possible during the shredding process. Large impurities are automatically ejected via the ballistic discharge hood without requiring the machine to stop. This reduces downtime and increases operational availability.

The ballistic chute is a purely mechanical protective feature designed to limit potential damage to the machine caused by larger foreign objects. Whether such objects are ejected depends on the specific material properties and process conditions, and this is not guaranteed for all types of contaminants.

The hammers and hammer shafts can be replaced quickly and easily. Rotor and hammer sets are optionally available with wear caps for enhanced durability.

Advantages:

  • Defined final particle sizes for a wide range of applications
  • High throughput capacity
  • Flexible particle sizes through different screen configurations
  • Material-dependent exposure of trapped ferrous and non-ferrous materials (e.g. nails, screws, fittings)
  • Ballistic chute as a protective function to minimise damage to the machine
  • High operational availability
  • Ideal complement to the TYRON primary shredder in stationary processing lines

What are the benefits of the ballistic chute?

Waste wood, commercial waste and other feed materials may contain heavy impurities such as metal parts and bolts. If these enter the shredding process uncontrolled, they can damage machine components, cause increased wear or trigger unplanned downtime.

The ARTHOS’s ballistic chute serves as a purely mechanical protective measure and enables the material-dependent ejection of certain larger and heavier foreign objects whilst the machine is in operation. This helps to reduce machine damage and downtime. The ballistic chute does not guarantee the complete removal of foreign objects.

Benefits

  • Material- and process-dependent ejection of certain larger foreign objects
  • Mechanical safety function
  • Reduction of potential machine damage and wear
  • Reduction of unplanned machine downtime
  • Ejection during operation without manual intervention

The ballistic chute serves as a mechanical protective device and enables the material-dependent ejection of certain solid foreign objects during operation.

Possible Impurities

  • Steel parts
  • Bolts and screws
  • Other foreign objects

The ejection hood serves as a purely mechanical protective device and does not guarantee the complete removal of foreign objects.
The result is a cleaner material flow for the subsequent process steps.

 

Every unplanned machine shutdown results in additional costs and operational disruption.

By removing heavy impurities at an early stage, potential damage events in downstream processes can be significantly reduced. At the same time, the risk of unexpected interruptions caused by damaged conveyor components or processing equipment is minimized.

Benefits for operators

  • Increased operational reliability
  • Protection of downstream equipment
  • Reduced maintenance and repair requirements
  • More stable material processing

The ballistic chute is particularly suitable for material streams with a high level of impurities.

Typical applications

  • Waste wood processing, e.g. railway sleepers with heavy steel plates
  • Commercial and industrial waste
  • Bulky waste
  • Biomass containing foreign materials

Every material stream presents unique challenges when it comes to contaminant separation.

We would be pleased to evaluate together whether the Ballistic chute is the right solution for your application. Take advantage of a material test or speak with our experts about reference installations and practical experience gained from comparable applications.

What Are the Benefits of the Easy Screen Change System?

Requirements for the final particle size can change quickly depending on the material being processed and its intended application. Different screen configurations can be used to achieve the desired product quality.

The easy screen change system of the HAAS ARTHOS hammermill provides easy access to the screening area and enables fast and straightforward replacement of screens.

Benefits

  • Fast access to the interior of the hammermil
  • Simplified screen replacement
  • Reduced downtime during product changes
  • Greater flexibility for varying material requirements
  • Supports adjustment of particle size to meet specific application needs

The ARTHOS screen assembly can be opened hydraulically for maintenance and screen replacement.

This provides convenient access to the entire screening area. Installed screens can be removed quickly and replaced with screens featuring different hole sizes or specifications.

As a result, the machine can be easily adapted to different material types and desired end products.

Whether processing waste wood, biomass, or commercial waste, different materials require different output particle sizes.

Thanks to the easy screen change system, processing operations can be adapted rapidly to new requirements without extensive machine modifications.

Typical Reasons for Changing Screens

  • Changing the desired final particle size
  • Adapting to different feed materials
  • Optimizing downstream processing steps
  • Seasonal or project-related material changes

The most suitable screen configuration for your application depends on both the material being processed and the required final particle size.

Our experts will be pleased to advise you on the optimal screen design for your application or demonstrate the flexibility of the ARTHOS through a material test.

Shredded Waste Wood Shredded Green Waste Shredded Plastics Shredded Bulky Waste Shredded Biomass Shredded Bark Shredded Commercial Waste Shredded PVC Profiles

Technical Data

  • Einlaufbreite 1,000 mm
  • Infeed Hight 1,200 mm
  • Rotor Ø 1,200 mm
  • Antriebsleistung 90-200 KW
  • Durchsatz bis 18t/h*
  • Einlaufbreite 1,300 mm
  • 1,200 mm
  • Rotor Ø 1,200 mm
  • Antriebsleistung 132-315 kW
  • Durchsatz bis 25t/h*
  • Einlaufbreite 1,600 mm
  • 1,200 mm
  • Rotor Ø 1,200 mm
  • Antriebsleistung 160-400 kW
  • Durchsatz bis 45t/h*
  • Einlaufbreite 2,000 mm
  • 1,200 mm
  • Rotor Ø 1,200 mm
  • Antriebsleistung 315-630 kW
  • Durchsatz bis 80t/h*

* Throughput capacity is based on an average output particle size of 60 - 80 mm, under normal, continuous feeding conditions and with an average level of material contamination.

Our brochure provides an overview of the features, specifications, and performance of the HAAS ARTHOS 1600 Mobile Hammermill. We would be pleased to discuss your requirements in detail and provide personalized advice in a one-on-one consultation.

The videos show the stationary ARTHOS operating as part of complete processing plants – from the secondary shredding of pre-shredded waste wood to the production of a defined biomass fuel fraction.

ARTHOS: SECONDARY SHREDDING IN WASTE WOOD PROCESSING

The ARTHOS processes pre-shredded waste wood into a consistent, defined particle size for subsequent processing stages.

Playing this video connects to YouTube.

ARTHOS: PROCESSING WASTE WOOD INTO BIOMASS FUEL

As part of a complete processing line, the ARTHOS converts waste wood into a homogeneous fuel fraction for energy recovery.

Playing this video connects to YouTube.

Request a reference visit

Would you like to see a HAAS machine in action?

Please provide us with your contact details. We will get in touch with you personally to discuss your requirements and then determine which demonstration machine would be suitable for a visit.

Pre-filled—can be customized as needed.
Name
Adress
Drag & Drop Files, Choose Files to Upload
Drag and drop files here or select files to upload.
(Files must not contain personal data. Maximum file size: 2 MB. Accepted file types: PDF, JPG, JPEG, and TXT.)

The information you provide will be processed electronically and stored for the purpose of handling your request.
Further information on the processing of personal data can be found in our Privacy Policy and in the information provided in accordance with Article 13 of the GDPR.
By submitting this form, you confirm that you have read this information.

Get advice

Would you like to know which solution best fits your needs?

Please provide us with your contact information. We’ll reach out to you personally to discuss the next steps together.

Pre-filled—can be customized as needed.

Your contact information

Name
Adress
Drag & Drop Files, Choose Files to Upload
Drag and drop files here or select files to upload.
(Files must not contain personal data. Maximum file size: 2 MB. Accepted file types: PDF, JPG, JPEG, and TXT.)

The information you provide will be processed electronically and stored for the purpose of handling your request.
Further information on the processing of personal data can be found in our Privacy Policy and in the information provided in accordance with Article 13 of the GDPR.
By submitting this form, you confirm that you have read this information.